Journal of Materials Research and Technology-JMR&T

Publicação

Study of electroflotation method for treatment of wastewater from washing soil contaminated by heavy metals

Weibull analysis of the tensile strength dependence with fiber diameter of giant bamboo

Strengthening of stainless steel weldment by high temperature precipitation

Performance of natural curaua fiber-reinforced polyester composites under 7.62 mm bullet impact as a stand-alone ballistic armor

High energy ballistic and fracture comparison between multilayered armor systems using non-woven curaua fabric composites and aramid laminates

Charpy impact tenacity of epoxy matrix composites reinforced with aligned jute fibers

A theoretical study using the multiphase numerical simulation technique for effective use of H 2 as blast furnaces fuel

Microstructural descriptors to characterize computer simulated microstructures generated by nucleation on a Kelvin polyhedra network

High temperature work hardening stages, dynamic strain aging and related dislocation structure in tensile deformed AISI 301 stainless steel

Fundamental aspects of the martensite transformation curve in Fe-Ni-X and Fe-C alloys

Experimental study of the evolution of tertiary dendritic arms and microsegregation in directionally solidified Al-Si-Cu alloys castings

Experimental study of the evolution of tertiary dendritic arms and microsegregation in directionally solidified Al-Si-Cu alloys castings

Effect of the impact geometry in the ballistic trauma absorption of a ceramic multilayered armor system

Eddy current characterization of cold-worked AISI 321 stainless steel

Damage identification parameters of dual-phase 600-800 steels based on experimental void analysis and finite element simulations

Characterization of TiB2-AlN composites for application as cutting tool

Charpy impact test of epoxy composites reinforced with untreated and mercerized mallow fibers

Ballistic comparison between epoxy-ramie and epoxy-aramid composites in Multilayered Armor Systems

Thermal and structural characterization of buriti fibers and their relevance in fabric reinforced composites

The constitution of martensite volume fraction in Fe-31wt%Ni-0.02wt%C

The effect of copper addition on the corrosion resistance of cast duplex stainless steel

Physical nonlinearity of precast reinforced geopolymer concrete beams

Peritectic Phase Transformation in the Fe-Mn and Fe-C System Utilizing Simulations with Phase-Field Method

Modeling and computational simulation of fluid flow, heat transfer and inclusions trajectories in a tundish of a steel continuous casting machine

Microstructure and elastic deformation behavior of β-type Ti-29Nb-13Ta-4.6Zr with promising mechanical properties for stent applications

Influence of different disinfection protocols on gutta-percha cones surface roughness assessed by two different methods

Damage identification parameters of dual-phase 600-800 steels based on experimental void analysis and finite element simulations

Comparison of transformations with inhomogeneous nucleation and transformations with inhomogeneous growth velocity

Comparison of transformations with inhomogeneous nucleation and transformations with inhomogeneous growth velocity

Computer simulation of site saturation and constant nucleation rate transformations on a network of Kelvin polyhedra

Computer simulation of site saturation and constant nucleation rate transformations on a network of Kelvin polyhedra

Ballistic performance and statistical evaluation of multilayered armor with epoxy-fique fabric composites using the Weibull analysis

Transformations with inhomogeneous nucleation and growth velocity

Transformations with inhomogeneous nucleation and growth velocity

The influence of manganese on the bake hardening of hot dip galvanized low carbon steels

Synergistic effects of organoclay Cloisite 15A on recycled polyethylene terephthalate

Phase transformation temperatures and Fe enrichment of a 22MnB5 Zn-Fe coated steel under hot stamping conditions

Phase-field simulation of peritectic steels solidification with transformation-induced elastic effect

Original ArticleComputer simulation in 3D of a phase transformation nucleated by simple sequential inhibition process

Original ArticleComputer simulation in 3D of a phase transformation nucleated by simple sequential inhibition process

Ellipsometric characterization of surface films on AZ31 magnesium alloy exposed to a Na2SO4 solution

Ellipsometric characterization of surface films on AZ31 magnesium alloy exposed to a Na2SO4 solution

Ellipsometric characterization of surface films on AZ31 magnesium alloy exposed to a Na2SO4 solution

Ellipsometric characterization of surface films on AZ31 magnesium alloy exposed to a Na2SO4 solution

Analysis of copper and zinc alloy surface by exposure to alcohol aqueous solutions and sugarcane liquor

Analysis of copper and zinc alloy surface by exposure to alcohol aqueous solutions and sugarcane liquor

Analysis of the compactness and properties of the hardened state of mortars with recycling of construction and demolition waste (CDW)

Analysis of the compactness and properties of the hardened state of mortars with recycling of construction and demolition waste (CDW)

Analysis of a compact iron ore sintering process based on agglomerated biochar and gaseous fuels using a 3D multiphase multicomponent mathematical model

Analysis of the compactness and properties of the hardened state of mortars with recycling of construction and demolition waste (CDW)

Abnormal grain growth in thin wires of commercially pure iron with anisotropic microstructure

Sodium alginate polymer as a kinetic inhibitor of methane hydrate formation

Phase transformations of the duplex stainless steel UNS S31803 under non-isothermal conditions

Phase transformations of the duplex stainless steel UNS S31803 under non-isothermal conditions

Microstructural and selective dissolution analysis of 316L Austenitic Stainless Steel

Microstructural characterization and non-destructive testing and of welded joints of duplex stainless steel in flexible pipes

Microstructural characterization and non-destructive testing and of welded joints of duplex stainless steel in flexible pipes

Microstructural and selective dissolution analysis of 316L Austenitic Stainless Steel

Inhibition effects of ionic and non-ionic derivatives of imidazole compounds on hydrogen permeation during carbon steel pickling

Inhibition effects of ionic and non-ionic derivatives of imidazole compounds on hydrogen permeation during carbon steel pickling

Computational modeling of a 3D matrix of duplex stainless steel and its ultimate strength in function of the sigma phase evolution

Computational modeling of a 3D matrix of duplex stainless steel and its ultimate strength in function of the sigma phase evolution

An equivalent work-hardening description of an interstitial-free steel sheet based on uniaxial tensile and hydraulic bulge tests

A study on the effect of the number of clusters at the phase transformation kinetics

A study on the effect of the number of clusters at the phase transformation kinetics

A degradation kinetics model of Mg-Zn-Mn-Ca alloys in Kokubo solution

Inhibition effects of ionic and non-ionic derivatives of imidazole compounds on hydrogen permeation during carbon steel pickling

Inhibition effects of ionic and non-ionic derivatives of imidazole compounds on hydrogen permeation during carbon steel pickling

Inhibition effects of ionic and non-ionic derivatives of imidazole compounds on hydrogen permeation during carbon steel pickling
Subscrever Journal of Materials Research and Technology-JMR&T

Sobre o site | Fale conosco

Versão Alpha. As informações contidas neste site foram importadas do Lattes no dia 20/04/2022.